New 14 Awg Red Marine Wire 100Ft Tinned Copper Class K Stranded Compatible With Marine 12V Branch

UNIVERSAL MARINE WIRE — 14 AWG RED TINNED COPPER PRIMARY WIRE 100 FT SPOOL:

ABYC E-11 STANDARD — RED COLOR USE (POSITIVE 12V):
Per ABYC E-11 marine electrical standards, RED color wire is designated for POSITIVE 12V ungrounded conductors. This 14 AWG red marine wire is intended for positive power feeds on branch circuits and individual accessory loads up to approximately 15-20 amps continuous service.

COMMON 14 AWG MARINE BRANCH CIRCUIT APPLICATIONS:
• Distribution Panel Branch Circuits to Individual Accessories
• Navigation Light Circuits (Bow, Stern, Anchor, Mast Lights)
• Cabin Lights and Reading Light Wiring
• Helm Gauge Power Feeds (Tachometer, Speedometer, Fuel)
• Electronics Auxiliary Power (After Main Fuse Panel)
• Stereo Speaker Positive Feeds
• 12V Cigarette Lighter Outlets and USB Power Ports
• Smaller Bilge Pump Positive Feeds (Up to 1100 GPH)
• Trim Tab Indicator Wiring
• Engine Compartment Sensor Wiring
• Cabin Fan and Blower Power Feeds
• Marine Horn Positive Feed
• Compass Light Wiring
• Trolling Motor Control Wiring (Foot Pedal, Hand Control)
• Radio Memory and Power Backup Circuits

NOT RECOMMENDED FOR (USE 12 AWG OR LARGER):
• Main Battery Cables and Battery Switch Feeds
• Engine Starter Wiring
• Windlass and Anchor Winch Power
• Bow Thruster Power Feeds
• Large Inverter Connections (1000W+)
• High-Current Trolling Motor Main Feeds (24V/36V Systems)

COMPATIBLE VESSEL TYPES:
• All Powerboats — Center Console, Cuddy Cabin, Express Cruiser, Walk-Around
• All Sailboats — Day Sailers, Cruisers, Racing Yachts
• Pontoon Boats and Houseboats
• Bass Boats and Bay Boats
• Personal Watercraft (PWC) Wiring Harness Repairs
• Outboard Motor Wiring Harness Repairs
• Sterndrive and Inboard Engine Compartment Branch Wiring

STANDARDS COMPLIANCE:
• UL Listed UL1426 Boat Cable Standard
• ABYC E-11 Compliant (American Boat & Yacht Council)
• United States Coast Guard (USCG) Specifications
• Made in USA

FITMENT NOTE:
Universal marine primary wire — fits any marine application requiring 14 AWG red positive power feed wiring on branch circuits and individual accessory loads. Not vehicle-specific. Per ABYC E-11 standards, this red wire should be used for positive 12V ungrounded conductors only. For higher-current main feeds (battery cables, starter, windlass, etc.) use 12 AWG or larger gauge wire.