24V Engine Starter Motor Compatible With 1989-1998 Champion Grader 720 720A 1992-1998 726A Cummins

OEM PART NUMBERS:
• Cummins: 3675119RX
• Delco: 10461018
• Delco: 1108181
• Delco: 1113350, 1113366, 1113370
• Delco: 1113403, 1113479, 1113486
• Delco: 1113536, 1113583
• Delco: 1993902

SPECIFICATIONS:
• Unit Type: Delco
• Series: 37MT
• Starter Type: DD (Direct Drive)
• Voltage: 24V
• Rotation: CW (Clockwise)
• Tooth Count: 12
• Gear OD: 1.815 in / 46.1mm
• Solenoid Position: 308 Degrees
• Mounting Hole 1: 0.660" ID Unthreaded
• Mounting Hole 2: 0.660" ID Unthreaded
• Mounting Hole 3: 0.660" ID Unthreaded
• Wet Clutch Seal: Yes
• Specification: 1/2" Reducers Installed Into Mounting Holes
• Weight: 50.5 lbs / 22.95 kg
• Condition: New

APPLICATION:
• Champion Grader 720/720A Cummins 8.3L (1989-1998)
• Champion Grader 726A Cummins 8.3L (1992-1998)

Direct OEM replacement 37MT starter for Champion 700-series motor graders. Features 308-degree solenoid position, wet clutch seal, 12-tooth clockwise pinion at 46.1mm OD, and 1/2" reducers factory-installed into all three mounting holes.

PRODUCT NOTICE:
As a parts distributor we mostly sell aftermarket parts (any OEM parts would be noted as such). Aftermarket parts are not sourced from the original vehicle or equipment manufacturer, but are designed to function the same as - if not better than - the original. All parts sold are new.

WARNING - This product may expose you to chemicals such as Lead, Carbon Black, Silica, Crystalline which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov