Home - Return to Previous Page

12V Fuel Lift Pump Fits Genie Sx-135 Xc Sx-150 Sx-180 Boom

164770A5
GENIE PART NUMBERS:
• 236259GT, 236259 (lift pump, fuel, Deutz TCD3.6)
• 214691GT, 214691 (earlier number, replaced by 236259GT)

SKYJACK PART NUMBERS:
• 164770, 9-164770 (pump, fuel supply)

DEUTZ PART NUMBERS:
• 04128101, 0412 8101, 4128101
• 04165235, 0416 5235, 4165235
• 04127127, 0412 7127, 4127127
• 04124902, 4124902
• 04124573, 4124573 (fuel supply pump kit)

OTHER PART NUMBERS:
• Thwaites T53418, T54318
• Terex Mecalac 800-20185, 80020185

SPECIFICATIONS:
• Type: 12V electric in-line fuel supply (lift) pump, low pressure feed to the engine fuel system
• Voltage: 12V DC (stamped 12 VOLTS on the pump can)
• Engines: Deutz TCD 2.9 L4, TD 2.9 L4, D 2.9 L4, TCD 3.6 L4, TD 3.6 L4, TCD 2.2 L3
• Body: silver cylindrical steel can, white end caps
• Ports: brass hose barb with hex adapter on one end, brass outlet nipple beside the terminals on the other end
• Terminals: two screw studs with spade tabs
• Mounting: 2 rubber lined steel P clamps with bolt tabs included (Skyjack lists 2 x 9-197095 clip with the pump)
• Weight: about 2 lb with clamps (catalog figures: 1.6 lb pump, 2 lb Skyjack kit shipping weight)
• Condition: New aftermarket, not a Genie, Skyjack or Deutz branded unit

PRODUCT NOTICE:
As a parts distributor we mostly sell aftermarket parts (any OEM parts would be noted as such). Aftermarket parts are not sourced from the original vehicle or equipment manufacturer, but are designed to function the same as - if not better than - the original. All parts sold are new.

WARNING - This product may expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Was: $373.08
Sale: $213.19
Save: 43%
Save: $159.89
Qty:
Free Shipping!

Description

GENIE S SERIES TELESCOPIC BOOMS:
• Genie S-40 telescopic boom with the Deutz D2.9 L4 / TD2.9 L4 engine, from serial 18351
• Genie S-45 telescopic boom with the Deutz D2.9 L4 / TD2.9 L4 engine, from serial 18351
• Genie S-60, S-65, S-60X, S-60 TRAX, S-65 TRAX telescopic booms with the Deutz D2.9 L4 / TD2.9 L4 engine, from serial S6013-26296
• Genie S-60 XC, S-65 XC telescopic booms with the Deutz D2.9 L4 / TD2.9 L4 engine, from serial S60XCH-45010 / S65XCH-45001 (also S65XCM, S65XCD serials)
• Genie S-80, S-85, S-80X telescopic booms with the Deutz TD2.9 L4 engine
• Genie S-80 XC, S-85 XC telescopic booms with the Deutz TD2.9 L4 or TCD 2.2 engine, from serial S80XCH-104 / S85XCH-101 (also S85XCD serials)
• Genie S-100, S-105, S-120, S-125 telescopic booms with the Deutz TD2.9 L4 engine
• Genie S-100HD, S-120HD telescopic booms with the Deutz TD2.9 L4 engine, from serial S100HD14D-200 / S120HD14D-201

GENIE SX / ZX BOOMS:
• Genie SX-105 XC, SX-125 XC telescopic booms with the Deutz TD2.9 L4 engine, from serial SX105D-174 / SX125D-101
• Genie SX-135 XC telescopic boom with the Deutz D2.9 L4 / TD2.9 engine, from serial SX135H-101 (also SX135D serials)
• Genie SX-150 telescopic boom with the Deutz D2.9 L4 engine, from serial SX15015H-100
• Genie SX-180 telescopic boom with the Deutz D2.9 L4 / TD2.9 L4 engine, from serial SX18013-005
• Genie ZX-135/70 articulating boom with the Deutz TD2.9 L4 engine, from serial ZX13513-2001

GENIE Z ARTICULATING BOOMS:
• Genie Z-45/25, Z-45/25J IC articulating booms with the Deutz D2.9 L4 engine, from serial Z452513A-48936
• Genie Z-45 XC articulating boom with the Deutz D2.9 L4 engine, from serial Z4525XCF-101
• Genie Z-62/40 articulating boom with the Deutz D2.9 L4 / TD2.9 L4 engine, from serial Z6215A-101
• Genie Z-80/60 articulating boom with the Deutz TD2.9 L4 engine

GENIE GS ROUGH TERRAIN SCISSOR LIFTS:
• Genie GS-3384 rough terrain scissor lift with the Deutz D2.9 L4 engine, from serial GS8414-42254
• Genie GS-3390 rough terrain scissor lift with the Deutz D2.9 L4 engine, from serial GS8416F-42383
• Genie GS-4390, GS-5390 rough terrain scissor lifts with the Deutz D2.9 L4 engine, from serial GS9014-49458

GENIE GTH TELEHANDLERS:
• Genie GTH-636 telehandler with the Deutz TCD 2.9 engine, from serial GTH0615E-10000
• Genie GTH-844 telehandler with the Deutz TCD 3.6 engine, from serial GTH08E-11500
• Genie GTH-1056 telehandler with the Deutz TCD 3.6 engine
• Genie GTH-5519 telehandler with the Deutz TCD 3.6 engine, from serial GTH5514B-101
• Genie GTH-2506 telehandler with the Deutz TCD 3.6 engine, serial GTH250617M-501 to GTH250619M-1000

SKYJACK TELEHANDLERS:
• Skyjack SJ643 TH telehandler with the Deutz TCD 2.9 L4 74 hp engine, serial 87 110 001 to 87 199 999
• Skyjack SJ843 TH telehandler with the Deutz TCD 2.9 L4 74 hp engine, serial 87 110 001 to 87 199 999
• Skyjack SJ1044 TH, SJ1044 THS telehandlers with the Deutz TCD 3.6 L4 engine, serial 87 210 001 to 87 299 999
• Skyjack SJ1056 TH, SJ1056 THS telehandlers with the Deutz TCD 3.6 L4 engine (74 or 107 hp), serial 87 310 001 to 87 399 999

DEUTZ ENGINES:
• Deutz TCD 2.9 L4, TD 2.9 L4, D 2.9 L4 diesel engines, 12V
• Deutz TCD 3.6 L4, TD 3.6 L4 diesel engines, 12V
• Deutz TCD 2.2 L3 diesel engine, 12V

SPECIFICATIONS:
• Type: 12V electric in-line fuel supply (lift) pump, low pressure feed to the engine fuel system
• Voltage: 12V DC (stamped 12 VOLTS on the pump can)
• Engines: Deutz TCD 2.9 L4, TD 2.9 L4, D 2.9 L4, TCD 3.6 L4, TD 3.6 L4, TCD 2.2 L3
• Body: silver cylindrical steel can, white end caps
• Ports: brass hose barb with hex adapter on one end, brass outlet nipple beside the terminals on the other end
• Terminals: two screw studs with spade tabs
• Mounting: 2 rubber lined steel P clamps with bolt tabs included (Skyjack lists 2 x 9-197095 clip with the pump)
• Weight: about 2 lb with clamps (catalog figures: 1.6 lb pump, 2 lb Skyjack kit shipping weight)
• Condition: New aftermarket, not a Genie, Skyjack or Deutz branded unit

Details

Shipping Information

  • Item Requires Shipping
  • 2.0 lbs.
  • W10.0000” x H10.0000” x L14.0000”
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.