Home - Return to Previous Page

12V Shallow Water Anchor Pump Fits Power Pole Pro Series

46007A5
MERCURY MARINE PART NUMBERS:
• 8M6007544

POWER-POLE PART NUMBERS:
• PUMP-PRO-F
• Pump PRO-F

OTHER PART NUMBERS:
• EMP: 4-6819
• Other OEM: 4-6788
• Other OEM: P881N

SPECIFICATIONS:
• Type: Anchor motor with pump and reservoir assembly
• Voltage: 12 Volt
• Current Type: DC
• Rotation: Reversible
• Terminal 2: Female spade
• Terminal 3: Female spade
• Certification: SAE J1171 marine ignition protected
• Weight: about 6.97 lb / 3.17 kg
• Condition: New

NOT THIS UNIT, THE SPORTSMAN PUMP:
• PUMP-SPN-F
• EMP 4-6818
• Other OEM 4-6789 and P882N

PRODUCT NOTICE:
As a parts distributor we mostly sell aftermarket parts (any OEM parts would be noted as such). Aftermarket parts are not sourced from the original vehicle or equipment manufacturer, but are designed to function the same as - if not better than - the original. All parts sold are new.

WARNING - This product may expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Was: $805.00
Sale: $460.00
Save: 43%
Save: $345.00
Qty:
Free Shipping!

Description

⚠️ PRO-F IS THE PRO SERIES PUMP:
• This is the PRO-F assembly for the Power-Pole Pro Series
• The Sportsman takes the SPN-F assembly, a different pump
• The Blade takes its own pump, also different
• Power-Pole states plainly that its pumps do NOT interchange
• Read the number on the old pump before you order

POWER-POLE SHALLOW WATER ANCHOR:
• Power-Pole Pro Series shallow water anchor, various models
• Power-Pole Pro Series II shallow water anchor
• The Pro Series is the light anchor between Blade and Sportsman
• Pro Series II comes in 4 foot, 6 foot and 8 foot lengths
• Rated to boats up to about 28 feet or 4500 lb

SOLD UNDER THESE BRANDS:
• Mercury Marine sells this assembly as 8M6007544
• Power-Pole calls it PUMP-PRO-F and Pump PRO-F
• EMP numbers it 4-6819
• It also carries the numbers 4-6788 and P881N

WHY THE PUMPS DO NOT SWAP:
• Power-Pole's own manual says the HPUs are not interchangeable
• They are identical in appearance from the outside
• Each is set to a different hydraulic pressure by anchor model
• A bigger anchor needs more pressure to drive the spike
• C-Monster units also carry model specific firmware on a board

PRO-F AGAINST SPN-F, ONE DIGIT APART:
• Pro Series: PUMP-PRO-F, EMP 4-6819, other OEM 4-6788 and P881N
• Sportsman: PUMP-SPN-F, EMP 4-6818, other OEM 4-6789 and P882N
• 4-6819 against 4-6818, one digit
• 4-6788 against 4-6789, one digit
• P881N against P882N, one digit
• Sellers mix the two lists up, so trust the pump not the listing

HOW TO VERIFY FIT:
• Read the label on the old pump, this one is PRO-F
• Check the terminals, this unit has TWO female spades
• It runs on 12 Volt DC and the motor is REVERSIBLE
• The reservoir is part of the assembly, not a separate tank
• Note the anchor serial number and revision letter first

WHAT IS IN THE BOX:
• Motor, hydraulic pump and reservoir as one assembly
• No hydraulic hose, that is ordered separately
• No hydraulic fluid, use Green Marine or an ISO 32 fluid
• No C-Monster circuit board, keep and refit your own

DO NOT ORDER IF:
• Your anchor is a Sportsman, that takes the SPN-F pump
• Your anchor is a Blade, that takes its own pump
• Your old pump reads 4-6818, 4-6789 or P882N
• Your system is 24 volt, this unit is 12 volt
• You need the C-Monster circuit board supplied with it

CROSS REFERENCE:
• Mercury Marine 8M6007544
• Power-Pole PUMP-PRO-F, Pump PRO-F
• EMP 4-6819
• Other OEM 4-6788, P881N

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 8.0 lbs.
  • W10.0000” x H10.0000” x L10.0000”
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.