Alternator 100 Amp Compatible With 2019-23 Toyota Corolla

ALTERNATOR 12V 100 Amp CW SD6 — TOYOTA COROLLA 2.0L M20A-FKS:

THREE CHECKS BEFORE YOU BUY:
• Engine: 2.0L M20A-FKS 1987cc 121 CID four cylinder
• Transmission: CVT automatic
• Build: Japan built with a VIN beginning J
• Case number: 27060-24030 or 104211-4420
• Output: 100 Amp clockwise with a 6-groove decoupler pulley

TOYOTA COROLLA HATCHBACK:
• Toyota Corolla Hatchback SE 2.0L M20A-FKS CVT (2019)
• Toyota Corolla Hatchback SE 2.0L M20A-FKS CVT (2020)
• Toyota Corolla Hatchback SE and XSE 2.0L CVT (2021)
• Toyota Corolla Hatchback SE and XSE 2.0L CVT (2022)
• Toyota Corolla Hatchback SE and XSE 2.0L CVT (2023)
• Toyota Corolla Hatchback Nightshade 2.0L CVT (2022-2023)

TOYOTA COROLLA SEDAN:
• Toyota Corolla SE 2.0L M20A-FKS CVT (2020-2023)
• Toyota Corolla XSE 2.0L M20A-FKS CVT (2020-2023)
• Toyota Corolla Apex Edition 2.0L M20A-FKS CVT (2021-2022)
• Toyota Corolla Nightshade 2.0L M20A-FKS CVT (2022-2023)

TRANSMISSION — READ THIS FIRST:
• CVT automatic cars — this alternator
• Six speed manual cars — a separate Toyota number
• Toyota splits this part by transmission on the same engine
• Same car same year same engine and two alternator numbers
• Check the transmission before the model year

JAPAN BUILT VEHICLES:
• Toyota catalogues this part for Japan built cars
• The first character of the VIN is the test
• A VIN beginning with J is a Japan built car
• Toyota splits alternators by assembly plant across this range
• The VIN is on the dash plate and the driver door jamb

THE ENGINE:
• M20A-FKS 2.0L four cylinder — 1987cc 121 CID
• Toyota Dynamic Force naturally aspirated petrol
• Platform code MZEA12
• Sixteen valve dual overhead camshaft
• Direct and port injection

OEM PART NUMBERS:
• Toyota: 27060-24030 / 2706024030
• Toyota: 27060-24080 / 2706024080 — from 03/2023
• Denso: 104211-4420 / 1042114420
• 27060-24080 supersedes 27060-24030 at 03/2023
• Both numbers describe the same 100 Amp CVT alternator

PULLEY AND ROTATION:
• 6-Groove Serpentine Decoupler Pulley (SD6)
• Clockwise rotation viewed from the pulley end
• Internal Regulator / Internal Fan (IR/IF)
• Denso Hairpin stator construction
• Negative ground / 12 Volt / 100 Amp

HOW TO VERIFY FIT:
• Match 27060-24030 or 104211-4420 on the case of your original
• Confirm a CVT automatic and not a six speed manual
• Confirm the VIN begins with J
• Count six grooves on the pulley

WHAT THIS UNIT IS:
• Output: 12 Volt 100 Amp clockwise
• Pulley: 6-groove serpentine decoupler pulley (SD6)
• Regulator: Internal • Fan: Internal • Stator: Denso Hairpin
• Transmission: CVT automatic
• Build: Japan built with a VIN beginning J
• Engine: 2.0L M20A-FKS 1987cc 121 CID