Belt Tensioner Compatible With 1996-2005 John Deere 770C/770Ch/772Ch 6076/6081 7.6/8.1L Diesel 400

JOHN DEERE TRACTORS:
• John Deere 8100/8100T/8110/8110T 6081 PowerTech 8.1L Diesel (1997-2002)
• John Deere 8200/8200T/8210/8210T 6081 PowerTech 8.1L Diesel (1997-2002)
• John Deere 8300/8300T/8310/8310T 6081 PowerTech 8.1L Diesel (1997-2002)
• John Deere 8400/8400T/8410/8410T 6081 PowerTech 8.1L Diesel (1997-2002)

JOHN DEERE HARVESTERS:
• John Deere 6610/6650/7200/7300/7400/7500 6076/6081 7.6/8.1L Diesel (1996-2006)

JOHN DEERE CONSTRUCTION:
• John Deere 560D/750C/762B/850C 6076/6081 7.6/8.1L Diesel (1996-2005)

JOHN DEERE MOTOR GRADERS:
• John Deere 644G/670C/670CH/672CH 6076/6081 7.6/8.1L Diesel (1996-2005)
• John Deere 770C/770CH/772CH 6076/6081 7.6/8.1L Diesel (1996-2005)


IMPORTANT:
400 inch-pound tension rating — this is the heavy-duty tensioner for 6076 (7.6L), 6081 (8.1L), and 6090 (9.0L) PowerTech engines in large-frame equipment. Do NOT substitute RE518097 (200 in-lb) or RE68715 (300 in-lb) — using a lower-rated tensioner on these engines will cause immediate belt slippage and accessory drive failure under load.

Primary applications: 8000/8010 series tractors (8100-8410), heavy construction (644G, 750C, 850C, 770C/772CH), and harvesters (6610, 6650, 7200-7500). 74mm grooved pulley for serpentine belt routing.

Failure symptoms: belt squeal under heavy engine load, alternator warning light, water pump slippage causing overheating, or A/C dropout. Replace the serpentine belt during tensioner replacement — a worn belt defeats the purpose of a new tensioner.

⚠️ Confirm 400 in-lb rating matches your application — rating is stamped on the original tensioner.