CATERPILLAR WHEEL LOADERS:
• Caterpillar 924G/924GZ/930G Cat 3056E 6.0L Turbocharged Diesel (2000-2008)
CATERPILLAR EXCAVATORS:
• Caterpillar M316C/M318C/M322C Cat 3056E 6.0L Turbocharged Diesel (2005-2011)
CATERPILLAR ASPHALT PAVERS:
• Caterpillar AP-655C/BB-760 Cat 3056E 6.0L Turbocharged Diesel (2004-2006)
CATERPILLAR MISCELLANEOUS:
• Caterpillar 564/574B Cat 3056E 6.0L Turbocharged Diesel (1995-2010)
IMPORTANT:
Oil pump for Cat 3056E — a 6.0L 6-cylinder turbo diesel also known as Perkins 1106C-E60TA. Perkins cross-ref: 4132F067. Used in Cat 924G/930G wheel loaders, M316C-M322C wheeled excavators, and AP-655 asphalt pavers. This is the OLDER Tier 2/3 version of the Cat 6.0L — do NOT confuse with C6.6 ACERT (Tier 4) which uses a different pump.
Failure symptoms: low pressure at hot idle, turbo bearing whine, gradual decline over service hours. On wheel loaders, pump wear often shows first during aggressive bucket loading at full throttle. Inspect oil cooler for internal restriction and pickup screen for debris. Replace gasket and O-rings during installation.
⚠️ Fits Cat 3056E / Perkins 1106C-E60TA. NOT for C6.6 ACERT (Tier 4).
Write the First Review!