Home - Return to Previous Page
Click on image to zoom

Engine Oil Pump Compatible With Caterpillar 120/120M/12M 2000-2015 C6.6 6.6L Diesel (Caterpillar

B420-0454A6
OEM PART NUMBERS:
• Caterpillar: 420-0454 (Primary OEM number)
• Caterpillar: 4200454 (Alternative format)
• Caterpillar: 373-8014 (Supersedes)
• Caterpillar: 293-5250 (Supersedes)

SPECIFICATIONS:
• Drive Type: Gear-driven
• Gear Type: Gerotor
• Engine Family: C6.6
• Displacement: 6.6L
• Condition: New

APPLICATION:
• Compatible with Caterpillar 320D/320D2/320DL/323D2L (2000-2015)
• Compatible with Caterpillar 924H/924HZ/928H/928HZ (2000-2015)
• Compatible with Caterpillar 953D/953K/963D/963K (2000-2015)
• Compatible with Caterpillar 120/120M/12M/140GC (2000-2015)

PRODUCT NOTICE:
As a parts distributor we mostly sell aftermarket parts (any OEM parts would be noted as such). Aftermarket parts are not sourced from the original vehicle or equipment manufacturer, but are designed to function the same as - if not better than - the original. All parts sold are new.

WARNING - This product may expose you to chemicals such as Nickel which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Was: $776.62
Sale: $443.78
Save: 43%
Save: $332.84
Qty:
Free Shipping!

Description

CATERPILLAR EXCAVATORS:
• Caterpillar 320D/320D2/320DL/323D2L C6.6 6.6L Diesel (2000-2015)
• Caterpillar 330 C6.6 6.6L Diesel (2000-2015)

CATERPILLAR WHEEL LOADERS:
• Caterpillar 924H/924HZ/928H/928HZ C6.6 6.6L Diesel (2000-2015)
• Caterpillar 930H/938H C6.6 6.6L Diesel (2000-2015)

CATERPILLAR TRACK-TYPE LOADERS:
• Caterpillar 953D/953K/963D/963K C6.6 6.6L Diesel (2000-2015)

CATERPILLAR MOTOR GRADERS:
• Caterpillar 120/120M/12M/140GC C6.6 6.6L Diesel (2000-2015)


IMPORTANT:
Supersedes Cat 373-8014 and 293-5250. Fits C6.6 and C7.1 ACERT engines in 320D/D2 excavators, 924H-938H loaders, 953D/963D track loaders, D6N/D6R dozers. Perkins equivalent: T410626 or 4132F067.

On ACERT engines, the oil pump feeds turbo bearings, fuel injector cooling, and DPF regeneration circuits. A pump showing acceptable pressure at idle may fail to deliver adequate flow under full load — causing turbo bearing damage or injector coking that isn't immediately obvious. Watch for oil pressure that reads normal cold but drops 15+ PSI as engine reaches operating temperature.

⚠️ Supersedes 373-8014 and 293-5250. Verify C6.6 or C7.1 ACERT engine.

Details

Shipping Information

  • Item Requires Shipping
  • 7.5 lbs.
  • W8.0000” x H6.0000” x L10.0000”
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.