REPLACES PART NUMBERS:
• FL5281
ITEM SPECIFICATIONS:
• Component: Cylinder Sleeve (Press-Fit)
• Bore: 76.5mm (Undersized)
• Material: Cast Iron
• Engine: Tiger Shark 900cc 3-Cylinder 2-Stroke
• Application: Tiger Shark PWC
• Model Years: 1995-1999
COMPATIBLE MODELS:
Tiger Shark PWC: Monte Carlo 900 (1996), Tigershark 900 (1995), TS-L 900 (1999)
PRODUCT DETAILS:
This 76.5mm bore cylinder sleeve is designed for the Tiger Shark personal watercraft powered by the 900cc 3-cylinder 2-stroke engine with 76.5mm bore and 65mm stroke. The cylinder sleeve is a precision-machined cast iron liner that presses into the aluminum cylinder casting to restore the cylinder bore when the original bore has become worn, scored, or damaged. Compatible with all Tiger Shark 900cc models including the Monte Carlo 900, Tigershark 900, and TS-L 900 personal watercraft from 1995 through 1999. The sleeve is supplied undersized and must be bored and honed to final dimensions after installation to achieve the correct piston-to-cylinder wall clearance for the Tiger Shark 900cc engine. Proper cylinder bore condition is essential for maintaining compression and oil control in the 2-stroke engine where the piston rings must seal against both combustion gases and crankcase charge. Professional machine shop installation is required for pressing the sleeve into the cylinder and boring to final specifications with proper crosshatch surface finish. Verify your engine model and bore size before ordering to ensure correct application.
PRODUCT NOTICE:
As a parts distributor we mostly sell aftermarket parts (any OEM parts would be noted as such). Aftermarket parts are not sourced from the original vehicle or equipment manufacturer, but are designed to function the same as - if not better than - the original. All parts sold are new.
WARNING - This product may expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Write the First Review!