Home - Return to Previous Page
Rareelectrical
Click on image to zoom

New Crankshaft Main Bearing And Seal Kit Compatible With 2003-2008 Ktm 65 Sx 65Cc 2-Stroke

(0) Reviews: Write first review
K020A1
OEM PART NUMBERS:
• KTM: 0625-6304 (Crankshaft Main Bearing — primary, 2x required per engine)
• KTM: 46030019000 (Crankshaft Main Bearing — alternate part number)
• KTM: 0760-22-50-7 (Crankshaft Oil Seal — primary)
• KTM: 46030020000 (Crankshaft Oil Seal — alternate part number)
• Bearing Standard: 6304/C4 (20x52x15mm)
• Catalog Kit Reference: K020

SPECIFICATIONS:
• Type: Crankshaft Main Bearing and Oil Seal Kit
• Application: Bottom-End Rebuild / Crankshaft Replacement
• Engine Coverage: KTM 65 SX / 65 XC 2-Stroke Single-Cylinder Liquid-Cooled
• Engine Displacement: 65cc
• Bore × Stroke: 45mm × 40.8mm
• Year Range: KTM 65 SX 1998-2008 / KTM 65 XC 2008
• Cylinder Configuration: Single-Cylinder Inline 2-Stroke Liquid-Cooled with Reed Valve Induction
• Transmission: 6-Speed
• Bearing Specifications: 6304/C4 Standard (20x52x15mm Inner Diameter × Outer Diameter × Width)
• Kit Contents: 2x Crankshaft Main Bearings (Prelubed and Packaged with Waterproof Grease), 2x Crankshaft Oil Seals (Left and Right) with Sealing Lip
• Models Covered: KTM 65 SX Youth Motocross (1998-2008) and KTM 65 XC Cross-Country (2008)
• Use: Compatible with KTM OEM and Hot Rods aftermarket crankshafts
• Condition: New

APPLICATIONS:
• KTM 65 SX 2-Stroke 65cc Single-Cylinder Liquid-Cooled Youth Motocross (1998-2008)
• KTM 65 XC 2-Stroke 65cc Single-Cylinder Liquid-Cooled Cross-Country (2008)
• 1998 launch year through 2008 final pre-redesign year
• DOES NOT FIT 2009 and Newer KTM 65 SX or KTM 60 SX — different bearings required

PRODUCT NOTICE:
As a parts distributor we mostly sell aftermarket parts (any OEM parts would be noted as such). Aftermarket parts are not sourced from the original vehicle or equipment manufacturer, but are designed to function the same as - if not better than - the original. All parts sold are new.

WARNING - This product may expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Was: $135.36
Sale: $77.35
Save: 43%
Save: $58.01
Qty:
Free Shipping!

Description

KTM 65 SX YOUTH MOTOCROSS — 65cc 2-Stroke Single-Cylinder Liquid-Cooled (1998-2008):
• KTM 65 SX 65cc 2-Stroke Single-Cylinder Liquid-Cooled (1998, LAUNCH Year — Replaced KTM 60 SX)
• KTM 65 SX 65cc 2-Stroke Single-Cylinder Liquid-Cooled (1999-2002, Early Production Era)
• KTM 65 SX 65cc 2-Stroke Single-Cylinder Liquid-Cooled (2003-2005, Refined Production Era)
• KTM 65 SX 65cc 2-Stroke Single-Cylinder Liquid-Cooled (2006-2008, Final Pre-2009-Redesign Era)
• KTM 65 SX 45mm Bore × 40.8mm Stroke 2-Stroke Reed Valve Induction Youth Motocross

KTM 65 XC CROSS-COUNTRY VARIANT (2008):
• KTM 65 XC 65cc 2-Stroke Single-Cylinder Liquid-Cooled Cross-Country / Off-Road (2008, Single-Year Variant)
• Same bottom-end engine as the KTM 65 SX with off-road-specific tuning and gearing

SPECIFIC MODEL YEARS COVERED:
• KTM 65 SX 1998 (Launch Year — Replaced KTM 60 SX)
• KTM 65 SX 1999-2000 (Early Production)
• KTM 65 SX 2001-2003 (Refined Production)
• KTM 65 SX 2004-2006 (Mid-Era Production)
• KTM 65 SX 2007-2008 (Final Pre-2009-Redesign Production Years)
• KTM 65 XC 2008 (Cross-Country Variant — Single Year)

NOTES:
• Compatible with KTM OEM crankshafts and aftermarket Hot Rods replacement crankshafts
• Same kit fits both KTM 65 SX (1998-2008) and 65 XC (2008) — same bottom-end engine architecture
• KTM 65 SX 1998 was the launch year — replaced the earlier KTM 60 SX (which used different bearings)
• 2009+ KTM 65 SX uses different crankshaft bearings (covered by separate kit) — verify before ordering
• Quality alternative to expensive KTM OEM main bearings and crankshaft seals
• Recommended for any bottom-end rebuild, crankshaft replacement, or seal-out repair
• Bearings prelubed and packaged with waterproof grease; crank seals feature sealing lip designed to reduce crank pin wear
• 6-speed transmission with reed valve induction
• Main bearings: 6304/C4 standard (20x52x15mm) — same standard used in Kawasaki KX60/65/80/85 and Suzuki RM60/65

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 2.0 lbs.
  • W9.0000” x H0.8000” x L12.0000”
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.