New Starter Motor Compatible With Volvo Penta Marine Fh16 3827444 M009t82179 M009t82179zc

24 VOLT 7.0kW 12-TOOTH CW PLGR PLANETARY GEAR REDUCTION STARTER MOTOR — MITSUBISHI FOR VOLVO PENTA D12 MARINE, GENERATOR SET AND INDUSTRIAL ENGINES:

THIS IS THE 12 LITRE STARTER — READ THIS FIRST:
This starter serves the Volvo Penta D12, the 12.1 litre 740 cubic inch six cylinder. The 13 litre and 16 litre engines, the D13 and D16, take a DIFFERENT starter carrying Volvo Penta 21103722, which has since been superseded by 24154095. The two units share the same voltage, the same 7.0 kW rating, the same 12 teeth, the same rotation and the same three bolt flange, and their Volvo numbers differ by four digits. Read the engine designation off your engine plate before ordering, because the starters are not interchangeable

ONE STARTER, TWO ORIGINAL BUILD NUMBERS:
Mitsubishi built this unit in two original specifications. The M9T82179 went on the marine engines and carries Volvo Penta 3827444, 874385 and 3586798. The M9T84079 went on the industrial and generator engines and carries Volvo Penta 21103718 and 3801288. Every service parts catalogue treats them as one interchangeable service unit, so whichever of those numbers is on your original, this is the correct replacement

MEASURE BEFORE ORDERING:
This is the 12 TOOTH clockwise starter. The gear outside diameter is 46.8 mm, or 1.843 inches. Overall length is 292.5 mm, or 11.516 inches, and the registry outside diameter is 91.6 mm, or 3.606 inches. It mounts on three unthreaded holes of 13.6 mm inside diameter with the mounting ears 125.8 mm apart. Check those figures against your original

VOLVO PENTA D12 MARINE PROPULSION:
• Volvo Penta D12-650 Marine Engine 12.1L 740cid (2006-2009)
• Volvo Penta D12-675 Marine Engine 12.1L 740cid (2006-2009)
• Volvo Penta D12-715 Marine Engine 12.1L 740cid (2006-2009)
• Volvo Penta D12-800 Marine Engine 12.1L 740cid (2006-2009)
• The number after the dash is the horsepower rating, so a D12-800 is the 800 horsepower version of the same 12.1 litre engine

VOLVO PENTA D12 MARINE AUXILIARY:
• Volvo Penta D12-MH Marine Auxiliary Engine
• Volvo Penta D12C Marine Engine
• Volvo Penta D12D Marine Engine

VOLVO PENTA D12 GENERATOR SET ENGINES:
• Volvo Penta TAD1240GE Generator Set Engine
• Volvo Penta TAD1241GE Generator Set Engine
• Volvo Penta TAD1242GE Generator Set Engine

VOLVO PENTA D12 INDUSTRIAL OFF-ROAD ENGINES:
• Volvo Penta TAD1241VE Industrial Engine
• Volvo Penta TAD1242VE Industrial Engine
• Volvo Penta TAD1250VE Industrial Engine
• Volvo Penta TAD1251VE Industrial Engine
• Volvo Penta TAD1252VE Industrial Engine
• Volvo Penta TWD1240VE Industrial Engine
• Parts data also groups these as TAD1241-42VE and TAD1250-52VE
• The generator and industrial engines are catalogued against Volvo Penta 21103718, so if you are looking after a Volvo Penta powered generator set or off-road machine rather than a boat, this is still your starter

DOES NOT FIT — THE NUMBERS THAT CATCH PEOPLE OUT:
• Volvo Penta 21103722, superseded by 24154095, is the D13 and D16 starter with the Mitsubishi M9T83879
• Volvo Penta 21103701 is a 5.5 kW 11-tooth starter for the 9 litre TAD940GE and TAD941GE
• Mitsubishi M9T82171 with Volvo 11127679 serves the Volvo CE A35D and A40D haulers, the EC330, EC360 and EC460 excavators and the L150E, L180E and L220E loaders
• Mitsubishi M9T82671 with Volvo 11423474 serves the Volvo Trucks FH and FH16
• All of those share the same 24 volt, 7.0 kW, 12 tooth, 92 mm flange envelope, which is exactly why they get mixed together in parts data

MATCH THE NUMBER ON YOUR ORIGINAL — CHECK BEFORE ORDERING:
Read the number stamped on your original starter and match it against the cross reference list. Where the number has worn off, the checks that matter are the engine designation on the engine plate, the tooth count, the gear diameter and the three bolt flange

FITMENT NOTES:
• 24 Volt, 7.0kW, PLGR planetary gear reduction, CW rotation, 12 teeth
• Gear outside diameter 46.8 mm, overall length 292.5 mm
• Registry outside diameter 91.6 mm, three 13.6 mm unthreaded holes
• Mounting ears 125.8 mm apart, integrated relay included
• Volvo Penta D12 engines only, marine and industrial
• Match your original unit against the numbers listed to confirm fitment