OEM PART NUMBERS — TROMBETTA:
• Trombetta OEM: 974-1215-610 (Primary / Base)
• Trombetta OEM: 974-1215-610-09 (Variant)
• Trombetta OEM: 974-1215-610-16 (Variant)
INDUSTRY CROSS-REFERENCES:
• Industry: 974-1215-610
• Other Names: Trombetta Solenoid
• Other Names: Trombetta Contactor
• Other Names: 12V Solenoid
• Other Names: Intermittent Duty Solenoid
• Other Names: 4-Terminal Solenoid
• Other Names: F180 Mount Solenoid
• Other Names: Industrial Solenoid
• Other Names: Heavy Equipment Solenoid
• Other Names: Starter Solenoid
• Other Names: Mobile Equipment Solenoid
PRODUCT SPECIFICATIONS:
• Product Type: Solenoid / Contactor
• Unit Type: Genuine Trombetta
• Voltage: 12V DC
• Number of Terminals: 4
• Duty Cycle: Intermittent
• Mounting: Flat 180 (F180)
• Case Material: Metal
• Contact Material: Copper
• Water Resistance: Water Resistant
• Quality Grade: ISO Certified Industrial Grade
• Designed For: Mobile Equipment
• Environmental Rating: Splash / Spray / Contaminants
• Operating Conditions: Extreme Temperatures + Humidity
• Shock / Vibration: Rated
• Country of Origin: USA
• Condition: New Genuine Trombetta
• Quantity: Sold Individually (1 Piece)
• Product Fit: Direct Fit OEM Replacement
• Installation: Original Mounting — No Modifications
• Recommended Use: OE Replacement
• Compliance: ISO / OEM-Spec Certified
APPLICATIONS:
• Case Heavy Equipment
• Case Construction Equipment
• Case IH Agricultural Tractors
• Case Loaders / Excavators / Skid Steers
• Mobile Industrial Equipment
• Heavy-Duty Trucks (Starter Solenoid)
• Forklifts / Material Handling
• ATVs / UTVs / Snowmobiles
• Golf Carts (Electric / Gas)
• Lawn / Garden Equipment
• Marine / Personal Watercraft
TYPICAL CIRCUIT USES:
• Starter Motor Solenoid (Intermittent High-Current)
• Winch Solenoid Control
• High-Current Accessory Control
• Auxiliary Lighting Relay
• Power Take-Off (PTO) Engagement
• Electric Brake Actuator
• Trolling Motor Controller
• Battery Isolator Control
KEY FEATURES:
• Genuine Trombetta Industrial Grade
• ISO Certified Manufacturing
• Water Resistant
• Designed for Extreme Environments
• Metal Case (Rugged)
• Copper Contacts (High Conductivity)
• F180 Flat 180-Degree Mount
• Made in USA
CRITICAL FITMENT NOTES:
• INTERMITTENT DUTY ONLY — NOT for Continuous Duty
• 4-Terminal Only — Not 2, 3, 5, or 6-Terminal
• 12V Only — Not 24V or 36V
• F180 Mounting Pattern Required
• Does NOT Fit Continuous Duty Applications
• Does NOT Fit 24V Systems
• Does NOT Fit Trombetta 684 / 114 / 586 Series
• Verify Terminal Count and Voltage Before Ordering
INSTALLATION CAUTION:
• ALWAYS USE A BACK-UP WRENCH ON BOTTOM NUT
• Over-Tightening Without Back-Up Wrench Can Damage Solenoid
• Use Proper Torque Specifications
• Apply Dielectric Grease to Terminals
• Verify Polarity Before Connecting
WHAT IS INCLUDED:
• One (1) Genuine Trombetta Solenoid
• Original Mounting Studs (F180 Pattern)
WHAT IS NOT INCLUDED:
• Mounting Bracket / Panel
• Wiring Harness / Terminal Connectors
• Installation Hardware / Lock Washers
• Weatherproof Boot / Cover
• Installation Instructions
SYMPTOMS OF FAILURE:
• Starter Motor Will Not Engage
• Clicking Sound When Key Turned
• Engine Cranks Slowly / Intermittent
• No Power to Starter
• Burnt / Melted Terminals
• Stuck Contacts (Starter Keeps Running)
• Corroded Terminal Posts
TROMBETTA HERITAGE:
• Trombetta Corp Founded 1929
• Menomonee Falls, Wisconsin, USA
• Industry Leader in Mobile Equipment Solenoids
• ISO Certified Manufacturing
PRODUCT NOTICE:
As a parts distributor we mostly sell aftermarket parts (any OEM parts would be noted as such). Aftermarket parts are not sourced from the original vehicle or equipment manufacturer, but are designed to function the same as - if not better than - the original. All parts sold are new.
WARNING - This product may expose you to chemicals such as Carbon Black, Silica, Crystalline which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Total Reviews (0)
Write the First Review!