0.75Mm Oversize Rebuild Kit 76.75Mm Compatible With 1989-1992 Kawasaki Jet Mate 650 1991-1995 Sc 650

OEM PART NUMBERS:
• Kawasaki: 13001-3701 / 130013701
• Kawasaki: 13001-3705 / 130013705
• Kawasaki: 13001-3714 / 130013714
• Kawasaki: 13001-2094 / 130012094

SPECIFICATIONS:
• Type: Top End Rebuild Kit (0.75mm Oversize)
• Bore Size: 76.75mm (0.75mm Over Standard 76.00mm)
• Standard Bore: 76.00mm (2.99")
• Oversize Bore: 76.75mm (0.030" Over)
• Engine: 635cc 2-Cylinder 2-Stroke Vertical Twin
• Bore × Stroke: 76mm × 70mm (2.99" × 2.76")
• Compression Ratio: 7.2:1
• Power: 52HP @ 6,000 RPM
• Induction: Crankcase Reed Valve
• Weight: 5 lbs
• Condition: New

KIT CONTENTS (Complete 2-Cylinder Top End):
• (2) Cast Pistons with Ring Sets (Japanese RIK Performance)
• (2) Wrist Pins / (2) Wrist Pin Bearings / (4) Circlips
• (1) Head Gasket / (1) Base Gasket / Exhaust Gasket(s)
• All gaskets and O-rings needed for complete top end rebuild

BORE SIZE CHART (Kawasaki 650):
• Standard: 76.00mm (010-810-10)
• 0.25mm Over: 76.25mm (010-810-11)
• 0.50mm Over: 76.50mm (010-810-12)
• 0.75mm Over: 76.75mm (010-810-13) — THIS KIT
• 1.00mm Over: 77.00mm (010-810-14)

APPLICATIONS:
• Kawasaki X2 650 (1986-1995) / SX 650 (1987-1993) / TS 650 (1989-1996)
• Kawasaki SC 650 (1991-1995) / Jet Mate 650 (1989-1992)

PRODUCT NOTICE:
As a parts distributor we mostly sell aftermarket parts (any OEM parts would be noted as such). Aftermarket parts are not sourced from the original vehicle or equipment manufacturer, but are designed to function the same as - if not better than - the original. All parts sold are new.

WARNING - This product may expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov